Fire Alarm Manual Pull Station Height Code

Posted on by

Enter any high occupancy building in the country and you may have noticed a red box with the word “Fire” or “Fire Alarm” written on its front cover. You may have seen them, but do you know what their main purpose is and more importantly, how to use them?

Fire

If you’re not familiar with manual pull stations, by reading this article you will gain a better understanding of how they operate and when they are to be used in fire emergency situations.

The requirements for manual pull stations as per NFPA 72 are pretty trivial and straight-forward. NFPA 72 requires that manual pull stations be installed within 60 inches of the exit doorway of each exit, mounted between 42 inches and 48 inches to the center of the handle, and, among other things, be red in color.

Manual Pull Station Myth Busted!

Fire Alarm Manual Pull Station Height Code California

If you’re in the fire alarm business, you are very familiar with the manual pull station. They seemingly jump out at you when watching movies, don’t they?

You’ve probably seen McGyver or some other show where a spy or bank robber pulls a station to distract or evacuate a building. The clincher is when this is done on a Hollywood movie set, it activates the building’s fire sprinkler system… This is simply a big myth.

Sure it looks cool on T.V. or in the movies but it’s stretching reality to its limits.

Unbeknown to most people, a fire alarm pull station cannot soak a building’s inhabitants with the sprinkler system. Let’s put this myth to rest, shall we? It is impossible to activate a water-filled sprinkler system with a manual pull station.

Yes, the building’s fire alarm system “is” tied into the sprinkler system, but in most cases, it is for monitoring purposes only and has nothing to do with sprinkler “activation”. It actually works the other way around. In reality, the sprinkler system activates the electronic fire alarm system, not visa-versa. So, the next time you see this happen in an action film, write it off as “bad research” or ignorance on the part of the movie producer.

Exceptions To This Rule

There “are” manual pull stations specifically installed to activate kitchen hood systems, CO2, Halon, and dry systems in places that require a fire retardant agent, so there is a bit of truth to this myth. In most cases, you will find these systems located in kitchens, computer rooms, document storage facilities or other areas that require immediate fire protection, but won’t cause water damage.

Many of these types of systems work by smothering the fire and reducing, replacing or removing oxygen from the air. In these types of systems, occupants must be fully trained and educated in what to do in case a fire breaks out and on the proper evacuation procedures required.

Typical Locations of Manual Pull Stations In Commercial Buildings

Dec 05, 2017 Typical Locations of Manual Pull Stations In Commercial Buildings. According to most fire and building codes, including NFPA72 and the International Building Codes, manual pull stations shall be installed at or near all building exits. The California Fire Code (CFC) states that manual fire alarm boxes must be located not more than 5 feet from the entrance to each exit. NFPA 72 further clarifies that manual fire alarm boxes shall be located within 5 feet (60 inches) of the exit doorway opening at each exit on each floor. Where should the pull station be located in relationship to an exit? The California Fire Code (CFC) states that manual fire alarm boxes must be located not more than 5 feet from the entrance to each exit. NFPA 72 further clarifies that manual fire alarm boxes shall be located within 5 feet (60 inches) of the exit doorway opening at each exit on.

According to most fire and building codes, including NFPA72 and the International Building Codes, manual pull stations shall be installed at or near all building exits. Without going into specific details, we will say that in the NFPA72, manual stations are to be installed within five feet from a single door exit and if the door is wider than specified for a single opening, two stations must be installed (this information can be found in NFPA72).

In high-rise buildings you will also find them near all stairway exit doors and even in elevator lobbies.

How To Operate A Manual Pull Station

Typically, there are two types of stations. One is called a single action, the other a double or dual action. On a dual action station, one is required to either lift a cover or push in a latch to enable the “pulling” action of the pull station.

In many jurisdictions the dual action pull station is required to prevent anyone from “accidentally” moving the pull station into an alarmed state. In other words, if a pull station is triggered on a dual-action, it is highly likely that the triggering was done intentionally.

When Is It Appropriate To Use A Manual Pull Station?

For all practical purposes, the pull station is used to manually activate a fire alarm if the fire has not yet reached the sensing range of automatic fire detection devices, such as smoke or heat detectors.

It is done by pulling a door or level down or away from the wall-base of the station. This pulling action then actuates a switch located within the manual pull station, which in turn triggers the building’s fire alarm system.

The reasoning behind locating pull stations near all building exits is so that the person activating the alarm is moving out and away from the building at the time they are activating the fire alarm system.

Please note that there are other rules concerning locations in long hallways. For more information or more intricate details, contact your local fire marshal’s office or purchase the one of the fire alarm code/handbooks.

Is There Ever A Bad Time To Activate A Manual Pull Station?

As long as there are signs of fire present, anytime is a good time. On the other hand, if one were to pull one of these stations just to get someone’s attention or to play a “joke”, then it’s not only ethically wrong to do so, but is illegal and considered a felony. It can lead to thousands of dollars in fines and even land someone in jail.

When it comes to perpetrators “purposefully” activating false fire alarms, the courts (and fire officials) look at this action as a form of aggression towards the safety and well-being of others lives and they don’t take this action lightly. There is a good chance that if one gets caught, he (or she) will get maximum penalties for committing this crime.

If you are thinking you won’t get caught, think again…

Fire Alarm Manual Pull Station

Case Of A Juvenile Delinquent’s Idiotic Reasoning

A couple of years ago, a middle school called us out to reset a pull station because they misplaced their alarm reset keys.

By the time we arrived, the campus police had already apprehended a girl who pulled the manual station because she was about to take a test and wanted extra time to study for the test.

Thinking that this ordeal would temporarily suspend classes and use up much of the time it would to take the test, she decided to disrupt the entire school by pulling the alarm. Little did she know there were hidden cameras at every exit recording her every move. Kids, if you are reading this article, this is a very serious matter and chances are, YOU WILL GET CAUGHT.

Sure, little practical jokes can be fun at times, but this is no laughing matter. Lives may be lost if a fire department is responding to a false alarm while others are in desperate need of help from their local fire department.

In Closing…
We hope you have learned what a manual pull station and its use is for and hope that you come back for more tips on commercial fire alarm systems. If you would like to stay up-to-date and informed, please feel free to fill out the form in the upper right hand corner of this page and an automatic email will be sent to you as soon as we place a new article on our website.

Fire Alarm Manual Pull Station Height Code

Thanks for visiting the Platinum Fire Protection website.

Manual

Filed Under: Initiating Devices
Tagged: Fire Pull Stations, How To Activate A Fire Alarm Pull Station, Illegal Activities Concerning Fire Alarm Systems, Initiating Devices, Manual Building Evacuation, Manual Fire Alarm Activation, Manual Pull Station, Manual Pull Station Locations, Manual Pull Stations

6 Common Fire Code Violations You Can Spot and Quickly Fix

The most common fire code violations are some of the easiest to identify and remedy. So why do they occur so frequently? The main reason these violations are taking place is simply that people aren’t aware of the fire code requirements. But claiming ignorance won’t prevent a code officer from giving you a hefty fire code violation fine. So here are the 6 common fire code violations you need to look for in your facility and how you can quickly remedy the problem.

1. Fire Extinguishers: Expired Tags and Obstruction

Fire Alarm Manual Pull Station Height Code

Whether it’s in your facility or somewhere else, if you start noticing fire extinguishers, you’ll see some with expired fire extinguisher inspection tags. In order to ensure all your extinguishers stay up to date on their inspections, you can hire a fire protection company or assign one of your staff members to perform the monthly fire extinguisher inspection. Most jurisdictions will allow any competent person to perform the monthly inspection since the code is very easy to understand and the inspection is simple. Another problem is that the fire extinguisher should be in plain sight and have nothing blocking it. This can be easily fixed by moving the obstruction out of the way.

2. Painted Fire Sprinkler Heads

Only manufacturers can paint fire sprinkler heads. Unfortunately, when painters make their way through a building they’ll forget to cover a few fire sprinkler heads. If a sprayer was used to paint the ceilings then the paint will be splattered on the head. You can identify the issue by performing a simple visual inspection at ground level. But if the ceilings are high you may have to get a closer look. Any fire sprinkler heads that are painted will need to be replaced by a professional fire protection contractor. Here are some tips on how to prevent other common fire sprinkler deficiencies.

3. Fire Alarm Trouble Signals

Unless the fire alarm is beeping or generating false alarms most people won’t know there’s a problem. That’s why it’s important to check your fire alarm panel on a regular basis. The panel will have certain items lite up which will indicate the fire alarm panel signals meaning and the issue. When there’s a problem don’t wait, call a fire alarm company right away.

4. Fire Pumps Not Regularly Tested

Out of sight out of mind. Fire pumps are located on the bottom floor of the building so they’re often forgotten about. A layer of dust on a pump is a good indicator that no one is performing the fire pump monthly churn test. But this neglect can lead to hefty fire pump repair costs that you’ll never forget. Fortunately, in-house personnel can perform this monthly test or you can hire a fire protection company to come to your site monthly. Many fire protection companies offer training and can show your staff how to perform the fire pump churn test. If you decide to have this test done in-house double check with the authority having jurisdiction on their requirements for personnel performing the test.

Fire Alarm Manual Pull Station Mounting Height

Ontario

5. Obstructed Exits

There should be no items impeding the pathway to any exit. The biggest problem isn’t with exits that are used on an everyday basis but with emergency exits. Since they’re used infrequently items will end up stacked up in front of them. In the worst cases, emergency exit doors are chained and locked. In the event of an emergency if people can’t get out you’ll find yourself with a lot more to deal with than a fine. So if you know this is occurring in your building clear the pathway to the emergency exit door and unlock it. Let facility personnel know nothing should impede the exit path.

6. Blocked Fire Alarm Pull Stations

This probably occurs as often if not more so than fire extinguisher obstruction. The most common fire alarm pull station obstruction items are plants, furniture, and displays. If someone can’t clearly spot the fire alarm pull station then there’s a problem and you need to remove the obstruction.

Now that you’re aware of these common fire code violations take a walk around and survey your facility. You have all the information you need to solve the problems. Make it part of your routine to look for these violations on a monthly basis and you won’t have to worry about receiving fines for fire code violations.

Subscribe To Our Newsletter

Join Kinetix’s monthly newsletter and receive expert advice, tips, and the latest industry news to make overseeing fire & life safety easier.

Thank you for your interest in Kinetix Fire!

Categorized in: Education, Fire Alarms, Fire Pumps, Fire Sprinklers, Fire Suppression, General